Once the CaddieCommand has been assembled to your motorcaddie, the front wheel must
be centered, so the unit will track straight. Turn the SPEED to the slowest position and turn ON both the CaddieCommand (distance timer) and the power switch. Locate the thumb-wheel knob on the rear of the receiver module. (See illustration)
Use this knob to adjust the front wheel. Do not attempt to turn the front wheel by hand.
The front wheel must be centered with the electronics. The knob is very
sensitive. Rotate it slowly to adjust the front wheel right or left as
needed.
The white arrow on the knob is an indicator only and may not always align exactly to center.
Make this adjustment a normal procedure each time you assemble the motorcaddie and CaddieCommand, and each time the front wheel becomes misaligned.