Control Description

1) On-Off Switch: The on-off switch, located top center of the switchbox, is self-explanatory in operation. It is located for convenient access in starting your Model 5 or, should the need arise immediate power cut-off.
2) Speed Control: Speed is controlled by the rotary thumb-wheel located at the rear of the switchbox, convenient for either hand operation. The speed control decal indicates speed in relation to thumb-wheel position.

There is a feature, known in technical terms as "ramp up", that automatically provides a gentle start at any speed setting up to, and including, full speed. Even so, your Model 5 is very powerful and it is best to start out at lower speeds, at least until you become familiar with the caddie.

3)
     Directionally, your Model 5 will follow the grade, ie: it may not run straight when used diagonally across a slope. Please keep this in mind.

Normal Operation:
1) Check desired speed setting.
2) Turn ON-OFF switch to ON. You can vary the speed control to suit your own pace.
3) To stop, turn ON-OFF switch to OFF. There is no need to change the speed control when stopping and re-starting. The speed control has a very wide range and can operate down to very slow speed, so be sure that the switch is OFF when the motorcaddie is stopped.


Note: If you choose to stop the Model 5 by turning the speed control to slow without activating on/off switch, it is normal for the power to shut off after a given time.